From your PDF file we image your sign to UV stable outdoor vinyl bonded to coroplast ready for your On The Step Sign! Once you have placed your order send us your PDF file HERE or email us on our CONTACT page and we create your outdoor waterproof UV stable display and it will be on it’s way to you in just a few days. Any image is possible including full color photographs! Be sure to save your file “for print” and make sure your scans are high resolution (150 dpi @ 100%) for the best quality.
| Small OnTheStep Printed Vinyl Sign | Large OnTheStep Printed Vinyl Sign |
 Small sample installed in holder
|
 Large sample next to holder
|
| Extra Large OnTheStep Printed Vinyl Sign | Extra Large OnTheStep Printed Vinyl Sign |
 Extra Large sample installed in On The Step Street Sign |
 Extra Large sample installed in Extra Large On The Step Sign
|
One Pair of Printed Sign Boards
- Small $100
- Large $135.00
- Extra Large $160.00
- Note; You are ordering the printed inserts only, if you need a sign holder to for the best value select one of our On The Step Kits.
On The Step A-Frame Sign Design Information
This following information is intended for a graphics designer or someone familiar with Computer Graphics.
If you need help we would be happy to walk you through the process call 1 800 253-1920 toll free for help!
Select “Read More” for the detailed Design Information
On The Step A-Frame Sign Design Information
We would be happy to walk you through the process call 1 800 253-1920 toll free for help!
Live Image (viewable):
- Small 24″ wide by 16.5″ tall
- Large 22″ wide by 26.5″ tall
- Extra Large 24″ wide by 34.5″ tall
Insert size (file with bleeds):
- Small 24″ wide by 18″ tall
- Large 22″ wide by 28″ tall
- Extra Large 24″ wide by 36″ tall
When installed the top and bottom 3/4 inch will be under the frame at the top and the bottom. In the photos we have noted the bleed area with a red line and shaded block.
The right and left edge of the display will be visible and not under the edge of the frame.
The signs are standard sizes used in many POP (Point of Purchase) displays. These are used at Stores, Malls, Office Buildings, Shopping Centers, Universities, Airports, Hospitals, Theme Parks or any retail or commercial location! Three sizes of printed signs are available
General Guidelines
- Files should be created in CMYK color mode. Converting from other modes may change colors or image quality.
- File should be 110-150dpi at full output size (this is important do not use web size images)
- Convert all fonts to outlines or include all fonts used. (PDF files include the fonts automatically)
- Logos and line based objects should remain in vector format whenever possible
- Do not embed placed files or images
- Do not embed color profiles in placed images or Photoshop files
- If you need us to change any information Include a layered file (Illustrator or PhotoShop). This allows us to make minor corrections if necessary.
- Send all files relevant for output
File specifications
The preferred file type is a print resolution PDF file, this file must be saved or exported to a PDF file by making sure all compression is off. Be sure all options for web optimizing are also off. We have included screen captures for Adobe Illustrator, your software may look different.
Please note in the screen image above all compression is off
The screen capture below shows “optimize” not selected.
Your software may look different but will have similar options
Can other file types be accepted?
Yes, we would be happy to accept your source files.
- CorelDraw Version 12 or lower
- Adobe Illustrator Version CS2 or lower
- Adobe InDesign Version CS2
- Adobe Photoshop or CorelPaint, save as TIFF
Resolution
For the highest quality display this checklist is important
- File should be at 110 to 150 dpi at 100%
- Avoid re-sampling to get a larger image, it will create “soft” images or show pixels
- Do not use web site images, they are low resolution and when enlarged will not look good
- If using PhotoShop your source file for a Large On The Step Print should be 22 by 28 at 150 dpi, this will result in a 3300 by 4200 50 meg file. Files Sizes will vary for other sign sizes
- Always use vector images when possible for Logos, Illustrations and line artwork.
The image above is a simulation of a 150 dpi image at 100%, the image below is a simulation of a web image used in a printed display. Always use the best quality image available.
The image below is how your display will look if you use a web image and re-sample it!
Color Matching
We would be happy to send a test strip of your image at no charge. You may also provide us with a PMS color to match to. We will make every effort to come as close as possible to this color, the process we use is CMYK.
Submitting your Files
Files under 100 meg can be sent on our corporate send file page HERE if you would like to use our FTP site send us a message on our CONTACT page and we will send you the link , login and password. You can also send your file by email, should your email provider allow large files.
What if I have no clue what all this information was for?
This information is intended for a graphics designer or someone familiar with Computer Graphics. We would be happy to walk you through the process call 1 800 253-1920 toll free for help! Remember our On The Step, A-Frame Sidewalk Signs are standard sizes, many of your existing signs could fit right in.
Vinyl Printed Coroplast Display
From your PDF file we image your sign to UV stable outdoor vinyl bonded to coroplast ready for your On The Step Sign! Once you have placed your order send us your PDF file HERE or email us on our CONTACT page and we create your outdoor waterproof UV stable display and it will be on it’s way to you in just a few days. Any image is possible including full color photographs! Be sure to save your file “for print” and make sure your scans are high resolution (150 dpi @ 100%) for the best quality.
| Small OnTheStep Printed Vinyl Sign | Large OnTheStep Printed Vinyl Sign |
| Small sample installed in holder
|
Large sample next to holder
|
| Extra Large OnTheStep Printed Vinyl Sign | Extra Large OnTheStep Printed Vinyl Sign |
| Extra Large sample installed in On The Step Street Sign |
Extra Large sample installed in Extra Large On The Step Sign
|
One Pair of Printed Sign Boards
- Small $100
- Large $135.00
- Extra Large $160.00
